← KMY catalogueMULTI-BRAND ELEVATOR SPARE PARTS

Car and landing doors

Door operator encoders and encoder boards

The operator encoder reports the door panel's position and speed to the door board. It is what lets the door slow down at the end of its travel, stop in the right place and detect an obstacle from the gap between command and actual position. A faulty encoder results in a door that slams, stays open or reopens for no reason.

9 part numbers in the KMY catalogue

How to choose the right door operator encoder

The points below determine compatibility. Gathering them before you enquire avoids ordering mistakes, which are the main cause of an elevator being out of service for a long time.

  • The exact operator model: Fermator, Wittur-Selcom, Otis, Thyssen, Orona or Prisma — encoders are not interchangeable between brands.
  • The type of encoder: integrated circuit board, pulley-and-ring encoder, or optical reader on adhesive tape.
  • The number of pulses per revolution expected by the door board.
  • The connector pin assignment and cable length, often dictated by the routing on the car roof.
  • The operator generation: the same trade name sometimes covers several encoder versions.

Available brands

KMY supplies door operator encoders and encoder boards for the main brands found in Algeria. Parts may be original or compatible depending on the part number: this is stated on each product page.

Part numbers in this family

Get a quote

For a quote, give the part number if you know it, the make and model of your elevator, and your wilaya. Without a part number, a photo of the fitted part and of its data plate is usually enough to identify it. KMY confirms the final price, availability and delivery time.

Other families in the same sub-assembly

← All part families