← KMY catalogueMULTI-BRAND ELEVATOR SPARE PARTS

Traction and machinery

Encoders, tachometers and speed feedback

The encoder reports the actual position and speed of the motor shaft to the drive. This feedback enables closed-loop control: without it, stopping accuracy and starting comfort deteriorate, and on a synchronous machine the motor simply cannot be controlled properly.

95 part numbers in the KMY catalogue

How to choose the right encoder and speed sensor

The points below determine compatibility. Gathering them before you enquire avoids ordering mistakes, which are the main cause of an elevator being out of service for a long time.

  • The signal type: incremental, SinCos, EnDat or absolute — they are not interchangeable.
  • The encoder supply voltage (often 5 V or 24 V DC) and the number of pulses per revolution.
  • The type of mechanical connection: hollow shaft, solid shaft, coupling or flywheel mounting.
  • The encoder interface board in the drive, which must accept the encoder's protocol.
  • The connector pin assignment and the cable length needed.

Available brands

KMY supplies encoders, tachometers and speed feedback for the main brands found in Algeria. Parts may be original or compatible depending on the part number: this is stated on each product page.

Part numbers in this family

Get a quote

For a quote, give the part number if you know it, the make and model of your elevator, and your wilaya. Without a part number, a photo of the fitted part and of its data plate is usually enough to identify it. KMY confirms the final price, availability and delivery time.

Other families in the same sub-assembly

← All part families