← KMY catalogueMULTI-BRAND ELEVATOR SPARE PARTS

Guiding, shaft and safety

Overspeed governors and tensioners

The overspeed governor is the safety device that detects car overspeed. It first opens the safety circuit and then, if the overspeed continues, locks the governor rope to trip the safety gear. Its tensioner keeps the rope taut in the pit. The governor is a safety component subject to type examination and sealed calibration.

60 part numbers in the KMY catalogue

How to choose the right overspeed governor

The points below determine compatibility. Gathering them before you enquire avoids ordering mistakes, which are the main cause of an elevator being out of service for a long time.

  • The elevator's rated speed, which determines the tripping speed.
  • The governor sheave diameter and the diameter of the associated rope.
  • The tripping direction: one direction (up or down) or both directions.
  • The calibration, which is sealed at the factory: a governor is not adjusted on site.
  • Consistency with the installed safety gear, with which the governor forms an approved assembly.
  • The applicable standard: upgraded installations generally fall under the EN 81-20/50 series.

Available brands

KMY supplies overspeed governors and tensioners for the main brands found in Algeria. Parts may be original or compatible depending on the part number: this is stated on each product page.

Part numbers in this family

Get a quote

For a quote, give the part number if you know it, the make and model of your elevator, and your wilaya. Without a part number, a photo of the fitted part and of its data plate is usually enough to identify it. KMY confirms the final price, availability and delivery time.

Other families in the same sub-assembly

← All part families