05 60 06 16 54 WhatsApp Email
KMY Ascenseurs Algeria logo                                                    

Opening hours

08:00 - 16:00

Phone

05 60 06 16 54

Email

contact@groupekmy.com

A part to replace on your elevator?

Find the right part number for your installation in our multi-brand parts catalogue. Add your parts to a quote request; our team confirms compatibility, the final price and lead times.

Indicative prices in dinars, taxes included · Final quote and lead times on request.

Outdoor freight elevator, Algeria, KMY Ascenseurs

In Algeria, many factories and warehouses install freight elevators outdoors to serve loading bays or mezzanines. This arrangement, acceptable if properly protected, becomes a source of chronic breakdowns when the controller, the hydraulic tank and the electronic components are exposed to the weather without adequate protection. Here is a real case KMY Ascenseurs encountered at an industrial client in early 2026.

1. The findings: recommendations ignored for more than a year

During a previous intervention, KMY Ascenseurs had made clear recommendations: protect the installation against water ingress and house the controller and the hydraulic tank in a closed, dry, ventilated machine room. A year later, at a new intervention, these recommendations had not been implemented. The result was predictable: a gradual deterioration of the entire installation.

2. What humidity does to a hydraulic freight elevator

A hydraulic freight elevator exposed to humidity suffers several forms of deterioration at once:

Oxidation of electronic components: landing boards, control buttons and connectors exposed to humidity gradually corrode. Faults are intermittent at first, then permanent. During this intervention, a landing board with advanced oxidation and a damaged control button had to be replaced.

Hydraulic oil degradation: a standard steel hydraulic tank installed outdoors goes through daily thermal cycles that cause internal condensation. Water gradually builds up in the oil, making it unfit for use. Moisture-laden oil causes loss of hydraulic efficiency, poor pressure transmission, pump damage and accelerated wear of internal components.

Typical symptom: the freight elevator starts moving but cannot lift heavy loads. This behaviour, often wrongly blamed on a mechanical problem, is in fact the signature of degraded hydraulic oil.

3. Immediate corrective actions

To put the freight elevator back into service, the following work was carried out:

- Complete replacement of the hydraulic oil
- Full flushing of the hydraulic circuit
- Replacement of the faulty control button
- Replacement of the oxidised landing board

These actions restore service temporarily, but without addressing the structural causes, the breakdowns will recur.

4. Essential structural actions

Solving the problem permanently absolutely requires:

- Housing the controller and the hydraulic tank in a closed, dry, ventilated machine room
- Permanently sealing the areas exposed to water ingress
- A general check of all exposed electronic components
- Installing a hydraulic tank fitted with a desiccant filter if a machine room cannot be built

5. Basic rules for installing an outdoor freight elevator

If your project needs an outdoor freight elevator, here are the principles to follow from the design stage:

A machine room is essential: whatever the configuration, the controller and the hydraulic unit must always be in an enclosed room, however small. A properly ventilated metal cabinet may be enough.

IP protection of components: outdoor buttons, sockets and sensors must be at least IP65 (protected against water jets).

Suitable oil and tank: use a moisture-resistant hydraulic oil and a tank fitted with a desiccant cap in humid environments.

More frequent maintenance: an outdoor freight elevator needs more frequent maintenance than an indoor one — at least every 3 to 4 months for a full visual inspection.

KMY Ascenseurs helps its clients define the right specifications from the design phase. Contact us before installing your next outdoor freight elevator.

Kaidi Yacine, founder of KMY Ascenseurs Algeria

Y. Kaidi

My dual technical and commercial expertise, built through substantial field experience, allows me to provide innovative solutions tailored to clients' needs.

Free quote

Get your quote in a few clicks

Configure your elevator and download your technical data sheet + estimate as a PDF.