05 60 06 16 54 WhatsApp Email
KMY Ascenseurs Algeria logo                                                    

Opening hours

08:00 - 16:00

Phone

05 60 06 16 54

Email

contact@groupekmy.com

A part to replace on your elevator?

Find the right part number for your installation in our multi-brand parts catalogue. Add your parts to a quote request; our team confirms compatibility, the final price and lead times.

Indicative prices in dinars, taxes included · Final quote and lead times on request.

Electric elevator frequency drive, Algeria

The frequency drive is the most heavily used electronic component in a modern electric elevator. It continuously controls the motor speed, manages acceleration and deceleration, supervises electrical braking and ensures levelling accuracy at landings. It is also one of the components most vulnerable to disturbances on the Algerian power grid.

1. What is an elevator frequency drive?

The frequency drive (or power inverter) converts the mains alternating current into a variable current, allowing precise control of the motor speed. An elevator without a drive starts and stops abruptly; with one, it accelerates and decelerates gradually for optimal comfort.

On modern elevators, the drive also handles the electromagnetic brake, motor thermal protection, safety fault detection and communication with the main control board.

2. The most frequent causes of failure in Algeria

Unstable power supply: this is the number one cause in Algeria. Frequent voltage drops, micro-cuts and surges gradually damage the drive's electronic components, especially the DC bus capacitors and IGBT transistors. A drive designed for a stable 380 V ±10% is put under severe strain on some Algerian networks where variations can exceed 20%.

At an international consulting firm in Algiers, KMY Ascenseurs diagnosed a drive failure in 2016 directly linked to grid disturbances. The recommendation made at the time is still valid today: install a voltage stabiliser upstream of the elevator.

Excessive heat in the machine room: drives are designed to operate between 0 and 40 °C. In Algeria, an uninsulated, unventilated machine room can reach 55 to 60 °C in summer, greatly accelerating the ageing of electronic components.

Dust and foreign bodies: dust building up in the drive's cooling fins reduces its ability to dissipate heat, causing repeated thermal trips that eventually damage the components.

Natural ageing: an elevator drive typically lasts 10 to 15 years in good conditions. Beyond that, ageing electrolytic capacitors cause increasingly frequent faults.

3. Symptoms of a drive at the end of its life

- Recurring error codes that can be cleared temporarily but quickly come back
- Abnormal vibration or noise when starting or decelerating
- Unpredictable stops without a clear fault code
- Drifting levelling accuracy (the elevator stops slightly above or below the landing)
- Behaviour that changes with ambient temperature (more frequent breakdowns in summer)

4. Repair or replace?

Faced with a faulty drive, there are two options: repair by replacing individual components, or complete replacement of the drive.

Repair is an option if the drive is recent (less than 8 years old) and the faulty component is clearly identified and available. It can cost 30 to 60% of a new drive.

Complete replacement is recommended if the drive is more than 10–12 years old, if breakdowns are recurrent or if the faulty part is no longer available. This approach removes every potential cause inside the drive, quickly restores the elevator's availability and secures operation in the medium term.

KMY Ascenseurs' experience with several office building fleets confirms this analysis: on 10-year-old elevators with a history of work on the braking chain, complete drive replacement proved more economical than attempts at partial repair.

5. How to protect your elevator drive

Install a voltage stabiliser: an investment of 50,000 to 150,000 DA depending on power, it protects all the elevator's electronic equipment against grid disturbances and can double the life of the drive.

Insulate and ventilate the machine room: keeping the machine room below 35 °C is one of the best guarantees of a long-lasting drive.

Clean regularly: at every maintenance visit, KMY Ascenseurs technicians check and clean the drive's cooling fins.

Plan the replacement: a 12-year-old drive that works today may fail tomorrow. Planning its replacement during scheduled maintenance avoids a costly emergency shutdown. Contact KMY Ascenseurs to assess the condition of your drive.

Kaidi Yacine, founder of KMY Ascenseurs Algeria

Y. Kaidi

My dual technical and commercial expertise, built through substantial field experience, allows me to provide innovative solutions tailored to clients' needs.

Free quote

Get your quote in a few clicks

Configure your elevator and download your technical data sheet + estimate as a PDF.