← KMY catalogueMULTI-BRAND ELEVATOR SPARE PARTS

Control and electronics

Load weighing and associated devices

The load weighing device tells the controller how full the car is. It triggers the overload signal, which prevents departure, and on some installations allows calls to be bypassed when the car is full and torque compensation at start-up.

6 part numbers in the KMY catalogue

How to choose the right load weighing and load control

The points below determine compatibility. Gathering them before you enquire avoids ordering mistakes, which are the main cause of an elevator being out of service for a long time.

  • The technology: mechanical with microswitches, strain gauges, or a sensor built into the suspension.
  • The measuring point: under the car floor, on the rope terminations or in the suspension.
  • The elevator's rated load and the thresholds to set (partial load, full load, overload).
  • The type of output to the controller: dry contacts or analogue signal.
  • Calibration must be redone after any work on the suspension or the floor.

Available brands

KMY supplies load weighing and associated devices for the main brands found in Algeria. Parts may be original or compatible depending on the part number: this is stated on each product page.

Part numbers in this family

Get a quote

For a quote, give the part number if you know it, the make and model of your elevator, and your wilaya. Without a part number, a photo of the fitted part and of its data plate is usually enough to identify it. KMY confirms the final price, availability and delivery time.

Other families in the same sub-assembly

← All part families