← KMY catalogueMULTI-BRAND ELEVATOR SPARE PARTS

Control and electronics

Frequency drives and associated boards

The frequency drive supplies the motor at variable voltage and frequency. It controls starting, acceleration, slowdown and levelling, and largely determines the ride comfort felt. On a synchronous machine, it cannot operate without a correctly interfaced encoder feedback.

123 part numbers in the KMY catalogue

How to choose the right frequency drive

The points below determine compatibility. Gathering them before you enquire avoids ordering mistakes, which are the main cause of an elevator being out of service for a long time.

  • The power and rated current, to be checked against the motor nameplate — current is the deciding criterion, not just the stated power.
  • The voltage and type of mains supply.
  • The control mode: open loop or closed loop, asynchronous or synchronous motor.
  • The type of encoder and the interface board needed.
  • The associated braking resistor and its sizing.
  • The communication mode with the controller (contacts, serial link), and full re-entry of the motor parameters after replacement.

Available brands

KMY supplies frequency drives and associated boards for the main brands found in Algeria. Parts may be original or compatible depending on the part number: this is stated on each product page.

Part numbers in this family

Get a quote

For a quote, give the part number if you know it, the make and model of your elevator, and your wilaya. Without a part number, a photo of the fitted part and of its data plate is usually enough to identify it. KMY confirms the final price, availability and delivery time.

Other families in the same sub-assembly

← All part families